BREW GUIDES

ISSUE #11

Bekele Gemeda: Pallet Coffee Roasters

What you'll need:
How to make it:
  1. Start by wetting the filter in your V60
  2. Pour the 20g of ground coffee into the dripper.
  3. Start your timer, pour 60g of the hot water in slowly and gently.
  4. At 0m45s, pour 80g (to ~140g) in a spiral pour.
  5. At 1m20s, pour 80g (to ~220g)
  6. At 1m45s, pour 100g (to ~320g)
  7. The coffee should drip through in 2m30s.
  8. Enjoy!

Davao del Sur Honey: Kapé Philippine Specialty Coffee

What you'll need:

If you don’t have an Origami dripper, you can use either a Kalita Wave dripper, or a V60 cone-style dripper, depending on the paper type. If the recipe calls for a wave-style filter, please use a Kalita Wave, and grind slightly coarser. If the recipe calls for a cone-style filter, please use a V60, and grind slightly coarser.

How to make it:
  1. Start by wetting the filter in your Origami dripper.
  2. Pour the 20g of ground coffee into the dripper.
  3. Start your timer, pour 40g of the hot water in slowly and gently.
  4. At 0m30s, pour an additional 60g of water (to ~100g).
  5. At 1m00s, pour an additional 60g of water (to ~160g).
  6. At 1m20s, pour an additional 60g of water (to ~220g).
  7. At 1m50s, pour an additional 60g of water (to ~280g).
  8. At 2m20s, pour an additional 40g of water (to ~320g).
  9. The coffee should drip through in 3m20s.
  10. Enjoy!

Yungas: Equator Coffee Roasters

What you'll need:
  • An AeroPress
  • Filter of choice (Two AeroPress standard filters preferred)
  • 14g of coffee (medium grind, approx. 900 microns)
  • 220g of water at 92°C/197°F
  • 10g of room temperature water
  • Carafe or vessel for your AeroPress
How to make it:
  1. Place your paper filter/ filters into the AeroPress cap.
  2. Put the cap on the AeroPress, and set the AeroPress on your carafe.
  3. Wet your filter to rinse out any undesirable flavours.
  4. Pour the 14g of ground coffee into the chamber.
  5. Start your timer, carefully add 220g of water.
  6. Stir 10 times, then immediately put on the plunger to avoid coffee dripping through.
  7. At 1m10s, slowly press the plunger for 40 seconds until complete.
  8. For more clarity, add 20g of bypass water as required.
  9. Enjoy!

Lucero de Colombia: Nucleus Torréfacteurs

What you'll need:
How to make it:
  1. Start by wetting the filter in your V60
  2. Pour the 20g of ground coffee into the dripper.
  3. Start your timer, pour 60g of the hot water in slowly and gently.
  4. At 0m45s, pour 80g (to ~140g) in a spiral pour.
  5. At 1m20s, pour 80g (to ~220g)
  6. At 1m45s, pour 100g (to ~320g)
  7. The coffee should drip through in 2m30s.
  8. Enjoy!

Ernane Pereira: Pallet Coffee Roasters

What you'll need:

If you don’t have an Origami dripper, you can use either a Kalita Wave dripper, or a V60 cone-style dripper, depending on the paper type. If the recipe calls for a wave-style filter, please use a Kalita Wave, and grind slightly coarser. If the recipe calls for a cone-style filter, please use a V60, and grind slightly coarser.

How to make it:
  1. Start by wetting the filter in your Origami dripper.
  2. Pour the 20g of ground coffee into the dripper.
  3. Start your timer, pour 40g of the hot water in slowly and gently.
  4. At 0m30s, pour an additional 60g of water (to ~100g).
  5. At 1m00s, pour an additional 60g of water (to ~160g).
  6. At 1m20s, pour an additional 60g of water (to ~220g).
  7. At 1m50s, pour an additional 60g of water (to ~280g).
  8. At 2m20s, pour an additional 40g of water (to ~320g).
  9. The coffee should drip through in 3m20s.
  10. Enjoy!

Ate Marivic Dubria: Kapé Philippine Coffee

What you'll need:
  • An AeroPress
  • Filter of choice (Two AeroPress standard filters preferred)
  • 14g of coffee (medium grind, approx. 900 microns)
  • 220g of water at 92°C/197°F
  • 10g of room temperature water
  • Carafe or vessel for your AeroPress
How to make it:
  1. Place your paper filter/ filters into the AeroPress cap.
  2. Put the cap on the AeroPress, and set the AeroPress on your carafe.
  3. Wet your filter to rinse out any undesirable flavours.
  4. Pour the 14g of ground coffee into the chamber.
  5. Start your timer, carefully add 220g of water.
  6. Stir 10 times, then immediately put on the plunger to avoid coffee dripping through.
  7. At 1m10s, slowly press the plunger for 40 seconds until complete.
  8. For more clarity, add 20g of bypass water as required.
  9. Enjoy!

El Patron: Pirates of Coffee

What you'll need
  • A French Press
  • Kettle
  • 450g of water at 93°C/199°F
  • 28g of coffee (medium-fine grind, approx. 820 microns
  • Two spoons
How to make it:
  1. Add your coffee grounds to your French Press.
  2. Start timer, pour water over coffee grounds, leave plunger aside.
  3. Wait 4 minutes.
  4. Stir the grounds 3 times gently, breaking through the crust that forms on top.
  5. Wait 4 minutes.
  6. Use the two spoons to scoop or skim the foam and floating coffee grounds out of the vessel.
  7. Wait another 2 minutes.
  8. Put the filter plunge on, and plunge gently to separate liquid from coffee grinds.
  9. Pour and enjoy!

Quetzal El Boqueron: Pallet Coffee Roasters

What you'll need:

If you don’t have an Origami dripper, you can use either a Kalita Wave dripper, or a V60 cone-style dripper, depending on the paper type. If the recipe calls for a wave-style filter, please use a Kalita Wave, and grind slightly coarser. If the recipe calls for a cone-style filter, please use a V60, and grind slightly coarser.

  1. Start by wetting the filter in your Origami dripper.
  2. Pour the 20g of ground coffee into the dripper.
  3. Start your timer, pour 60g of the hot water in slowly and gently.
  4. At 0m30s, pour the remaining 280g of water (to ~340g) in one gentle and slow pour.
  5. The coffee should drip through in 2m30s.
  6. Enjoy!

Le 6AM: Nucleus Torréfacteurs

What you'll need
  • A French Press
  • Kettle
  • 450g of water at 93°C/199°F
  • 28g of coffee (medium-fine grind, approx. 820 microns
  • Two spoons
How to make it:
  1. Add your coffee grounds to your French Press.
  2. Start timer, pour water over coffee grounds, leave plunger aside.
  3. Wait 4 minutes.
  4. Stir the grounds 3 times gently, breaking through the crust that forms on top.
  5. Wait 4 minutes.
  6. Use the two spoons to scoop or skim the foam and floating coffee grounds out of the vessel.
  7. Wait another 2 minutes.
  8. Put the filter plunge on, and plunge gently to separate liquid from coffee grinds.
  9. Pour and enjoy!

El Patron Espresso: Pirates of Coffee

How to make it for espresso:
19g in, 42g out, in 25 seconds.
How to make it for espresso and milk:
20g in, 34g out, in 25 seconds.

Le 6AM Espresso: Nucleus Torréfacteurs

How to make it:
18g in, 36g out, in 25-30 seconds.

Quetzal El Boqueron Espresso: Pallet Coffee Roasters

How to make it:
18g in, 36g out, in 28 seconds.

Davao del Sur Honey Espresso: Kapé Philippine Specialty Coffee

How to make it:
18g in, 36g out, in 28-32 seconds.

Fizzy Cherry Cola Espresso: Pirates of Coffee

How to make it:
19g in, 42g out, in 25 seconds.

Ismael Hassen Espresso: Pallet Coffee Roasters

How to make it:
18g in, 50g out, in 26 seconds.

Ethiopia Asikana Decaf: Pallet Coffee Roasters

What you'll need:
How to make it:
  1. Start by wetting the filter in your V60
  2. Pour the 20g of ground coffee into the dripper.
  3. Start your timer, pour 60g of the hot water in slowly and gently.
  4. At 0m45s, pour 80g (to ~140g) in a spiral pour.
  5. At 1m20s, pour 80g (to ~220g)
  6. At 1m45s, pour 100g (to ~320g)
  7. The coffee should drip through in 2m30s.
  8. Enjoy!

Colombia SWP Decaf: Nucleus Torréfacteurs

What you'll need:
  • An AeroPress
  • Filter of choice (Two AeroPress standard filters preferred)
  • 14g of coffee (medium grind, approx. 900 microns)
  • 220g of water at 92°C/197°F
  • 10g of room temperature water
  • Carafe or vessel for your AeroPress
How to make it:
  1. Place your paper filter/ filters into the AeroPress cap.
  2. Put the cap on the AeroPress, and set the AeroPress on your carafe.
  3. Wet your filter to rinse out any undesirable flavours.
  4. Pour the 14g of ground coffee into the chamber.
  5. Start your timer, carefully add 220g of water.
  6. Stir 10 times, then immediately put on the plunger to avoid coffee dripping through.
  7. At 1m10s, slowly press the plunger for 40 seconds until complete.
  8. For more clarity, add 20g of bypass water as required.
  9. Enjoy!

Peru CO2 Decaf: Equator Coffee Roasters

What you'll need
  • A French Press
  • Kettle
  • 450g of water at 93°C/199°F
  • 28g of coffee (medium-fine grind, approx. 820 microns
  • Two spoons
How to make it:
  1. Add your coffee grounds to your French Press.
  2. Start timer, pour water over coffee grounds, leave plunger aside.
  3. Wait 4 minutes.
  4. Stir the grounds 3 times gently, breaking through the crust that forms on top.
  5. Wait 4 minutes.
  6. Use the two spoons to scoop or skim the foam and floating coffee grounds out of the vessel.
  7. Wait another 2 minutes.
  8. Put the filter plunge on, and plunge gently to separate liquid from coffee grinds.
  9. Pour and enjoy!

Dustin Yu

Dustin Yu

Director of Coffee. Works with the best Canadian roasters to curate our subscription boxes. Creates brew guides as a coffee education super nerd. Has a terrible habit of always ordering a washed Colombian or Ethiopian pour over. Loves making ceramic coffee cups, and is also a cooking enthusiast!



Dustin Yu

Dustin Yu

Director of Coffee. Works with the best Canadian roasters to curate our subscription boxes. Creates brew guides as a coffee education super nerd. Has a terrible habit of always ordering a washed Colombian or Ethiopian pour over. Loves making ceramic coffee cups, and is also a cooking enthusiast!